To ensure the safety of quartz stone countertop processing equipment: in the installation of quartz stone countertop processing equipment, can not be in a thunderstorm to carry out this operation, because this time not only lightning and thunder easily triggered safety accidents, and air humidity may lead to electrocution, so you should choose a dry and sunny weather to operate. At the same time, good quality quartz stone countertop processing equipment manufacturers also reminded not to be able to install power sockets in particularly humid locations, and operators must know how to install in accordance with strict safety norms.

Quartz stone countertop processing equipment power supply voltage and wiring should comply with the specifications: in order to ensure that the quartz stone countertop processing equipment can work stably, so it must be provided to a very stable power supply voltage, and the voltage range must be in line with the specified requirements, otherwise it should be a professional and technical personnel to guide and select the voltage regulator or to take some measures in order to meet the requirements of use. At the same time, pay attention to the quartz stone countertops processing equipment and control cabinets must be grounded, can not plug the data cable line with electricity, so to avoid such irregularities.

Installation of quartz stone countertop processing equipment to be firmly in place: in the specific installation of quartz stone countertop processing equipment, the relevant screws should be installed in place, but at the same time can not be too hard in order to avoid the occurrence of slippery wire phenomenon. Low-cost quartz stone countertop processing equipment manufacturers emphasized that the location of the knife in particular because of the need to carve, so the installation must be strong enough and clamp the knife, the use of the process should keep the sharpness of the knife to meet the requirements, or else to be replaced in a timely manner in order to avoid overloading the motor due to the knife is not sharp enough and affects the effect of the carving.

The above is the quartz stone countertop processing equipment installation points include several aspects, in addition to moving the machine should have a professional present to guide. If the installation or use of quartz stone countertop processing equipment found to have an abnormal situation, then it should be in accordance with the operating manual for troubleshooting or immediately find a dealer to contact to solve the problem, do not unauthorized dismantling in order to avoid causing human damage.